Industrial Facility & Factory Coatings

Falls and injuries caused by slippery industrial facility and factory floors cost millions of dollars in downtime and workers' compensation costs. Drastically improve safety, productivity, and longevity of industrial facility and factory environments with durable factory non-slip coating.

Why Use Anti-Skid Coating for Industrial Facility and Factory Applications?

SafTrax’s line of industrial facility anti-skid sprays and non-slip coatings increase the longevity of factory surfaces by protecting them from traffic, moisture, abrasion, chemicals, vehicles, and other damaging elements. Easy to apply and an average lifespan of one decade, our factory non-slip coatings ensure safer work environments by providing superior traction in high-traffic areas (both pedestrian and vehicular traffic) and demanding environments where slip-and-fall accidents may occur. This durable and economical solution not only solves traction issues, but it also provides degradation protection for industrial facilities and factory surfaces.

Benefits of SafTrax Coating for Industrial Facility and Factory Applications

Reduce injuries and job site hazards and increase uptime and productivity with increased traction from SafTrax factory non-slip coatings. Our coatings also extend the life of unprotected industrial facility and factory surfaces by protecting them from corrosion, wear, abrasion, heat, and impact force. Developed to perform in extreme conditions, SafTrax coatings are ideal treatments for carbon steel, cast or ductile iron, aluminum, and stainless-steel surfaces. Finally, our anti-slip coatings require zero routine maintenance and capable of lasting up to five times longer than other coating options, making them a durable and economical non-skid solution.

Anti-Skid Coating Characteristics

The SafTrax line of anti-slip coatings includes TH335, TH604, and TH605, which are Americans with Disabilities Act-compliant and exceed Occupational Safety and Health Administration non-skid requirements. TH604 is a tubular or cored aluminum wire filled with up to 46 percent of aluminum oxide (Al2O3) powder, whereas TH605 is tubular or cored wire filled with up to 46 percent of silicon carbide (SiC) powder. TH335 is a tubular or cored wire comprised of iron and packed with aluminum and carbon powders.

Our coatings surpass NAVY/NAVSEA Military Specification No. 24667 testing requirements, withstand flexing, resist peeling. With a coefficient of friction of 1:1, they help curb slip-and-fall accidents by offering improved grip in wet or hazardous environments.

Using tubular cores filled with ceramic powders of aluminum, silicon, or iron, SafTrax products are 45 percent lighter than traditional non-skid coatings and provide superior performance with less weight. Common industrial facility and factory applications include forklift loading ramps, walkways, stairwells, vehicle ramps, material lifts, storage areas, and much more.

SafTrax products are ready to use and do not require preparation, time, and regular maintenance. They will adhere to practically any substrate and forms a superior bond that resists delamination. A twin wire arc process is used to spray an anti-skip coating on metal substrates.

Increase the safety and longevity of any industrial facility and factory surface with SafTrax non-slip coatings. Our team is available to help identify the best SafTrax coating for your application.

TH604 Anti-Slip Coating

TH604 is a dual-duty coating consisting of aluminum and ceramic oxide that offers both corrosion protection as well as texture through its hard ceramic oxides that offer great wear resistance.

Learn More
 

TH605 Industrial Floor Coating

TH605 is a dual duty coating consisting of aluminum and silicone carbide that offers both corrosion protection as well as texture through its hard ceramic oxides that offer great wear resistance.

Learn More
 

TH335 Wear-Resistant Coating

TH335 is a cored wire specifically designed for arc spray systems. It produces a well-bonded coating with high-hardness.

Learn More
 

SAFTRAX ANTI-SLIP COATINGS

Compliant with the Americans with Disabilities Act and surpassing Occupational Safety and Health Administration non-skid requirements, these coatings create safe work environments, withstand flexing and maintain corrosion resistance when gouged in service.

Add superior slip and fall and wear resistance to your application.

 

WHY SAFTRAX?

Looking for a non-skid solution?

If you have any questions about our products or application process please contact us and our team will be happy to assist. Let our years of experience in thermal spray help you with your specific nonskid needs. Samples provided upon request.

The SafTrax Advantage

SafTrax vs. Other Coatings

While a variety of epoxy and paint-based slip-resistant coatings are available, SafTrax anti-slip thermal spray coatings are the best way to get a grip on safety and combat corrosion.

Learn More
 

Long Lasting (Life Cycle)

SafTrax coatings have an average lifespan of one decade or longer and provide a safe, non-skid environment that protects metal substrates from corrosion, wear, abrasion, heat and impact forces.

Learn More
 

Guarantee/Quality Assurance

Thermion goes to great measures to guarantee the quality of both its equipment and wires, SafTrax nonskid products are no different.

Learn More
 

Testimonials

Learn more about what our customers have to say.

Learn More
 

Contact Us

If you have any questions about our products or application process please contact us using the form below. Let our years of experience in thermal spray help you with your specific nonskid needs. Samples provided upon request.